0 05mm copper based alloys

Brand Name:OHMALLOY

Model Number:C17200

Place of Origin:China

...05mm copper based alloy Beryllium copper alloy C17200 Foil/Strip for stamping Beryllium-Copper-alloys are mainly based on copper with a beryllium addition. High strength beryllium copper alloys contain 0.4-2% of beryllium with about 0.3 to 2.7% of other alloying elements such as nickel, cobalt, iron or Lead. The high mechanical strength is achieved by precipitation hardening or age hardening. It is the best high-elastic material in copper alloy

Brand Name:Senphus

Model Number:6J13/6J13P/6J13X

Place of Origin:China

...manganese and nickel as key components, recognized for its high electrical resistivity, minimal resistance temperature coefficient, and low thermal EMF against copper. 6J13/6J13P/6J13X F2 Manganin-Type Precision Resistance Wire is a copper-based alloy with

Brand Name:HIGH BROAD

Model Number:CuBe

Place of Origin:CHINA

...Copper Beryllium Alloys Copper Based Alloy Copper Beryllium Beryllium copper is one of the best performing copper based alloys. It is a newly developed alloy containing approximately 96% copper, 4% beryllium, and enough nickel to increase elongation. China Hunan High Broad New Material Co.Ltd 铝基中间合金 Aluminum master alloy 镁基中间合金 Magnesium master alloy 其他中间合金 Other master alloy...

Brand Name:TANKII

Model Number:6J13

Place of Origin:Shanghai, China

10mm*1mm Copper Based Alloy Manganin 6J13 Soft Bare Wire Coil / Flat Ribbon Description Manganin is a trademarked name for an alloy of typically 86% copper, 12% manganese, and 2% nickel. A resistance alloy with moderate resistivity and low temperature ...

Brand Name:TOBO/METAL

Model Number:Copper Nickel Elbow

Place of Origin:CHINA

Copper-based Alloy Pipe Fittings Copper Nickel Cu-Ni 90/10 Uns C70600 c70610 Steel Elbow Coupling Product name Copper Nickel Pipe Fittings Production standards ASTM ASME SUS JIS DIN Chemical composition Fe Mn Ni ...

Brand Name:Copper Based alloy Metal Injection Molding Self

Model Number:Lubricating Cylindrical Oiled Bearing Bush

Place of Origin:China

..., alloy welding wire, metal powder, metal powder of various mesh sizes for casting, alloy cutter head, high hardness wear-resistant powder, spray welding alloy powder, and other hard facing materials of various varieties and specifications, as well

Brand Name:DZ

Place of Origin:CHINA

Casting Machine Furnaces/Plants For Copper And Copper-based Alloys Number of robots 1 Electric furnace power 3*35KW Electric furnace melting rate 350KG Air pressure 6KG Water ...

Brand Name:Ruideer

Place of Origin:Zhuzhou City, Hunan Province,China

Model Number:User-defined

Easy Maintenance Vacuum Heat Treatment Furnace For Iron Bae Alloy / Copper Base Alloy Description: Small or complex parts are difficult to produce by casting or machining. Components that require sintering are often delicate, intricate, and easy to botch. ...

Brand Name:RUIHUI

Place of Origin:Guangdong, China (Mainland)

Punch automated processing, copper-based alloy die stamping, NC feeder With the improvement of the quality and automation of punching, sheet metal stamping is developing towards high speed and high precision, and CNC punching machine can meet this demand...

Brand Name:JINGJIE

Model Number:BSC

Place of Origin:China

One Strand Horizontal Continuous Casting Machine Copper Base Alloy Cu - Ni Ⅰ.Major Technical Parameters of Equipment: 1 Smelting furnace: 1.1 Total capacity of furnace 5.0T 1.2 Effective capacity of furnace 2.5T 1.3 Furnace voltage 380V 1.4 Furnace power ...

Brand Name:HUONA

Model Number:CUNI2

Place of Origin:CHINA

Choose our Copper Nickel Alloy Wire for its exceptional performance and reliability. Characteristic Resistivity ( 200C μΩ.m) Max.working Temperature ( 0C) Tensile Strength (Mpa) Melting point (0C) Density ( g/cm3) TCR x10-6/ 0C (20~600 0C) EMF vs Cu (μV/ ...

Brand Name:DLX

Model Number:Monel 400

Place of Origin:China Jiangsu

...based alloy Monel 400 wire 0.25mm Monel Series Monel is a group of nickel alloys, primarily composed of nickel and copper, with small amounts of iron, manganese, carbon, and silicon. Monel have a good ability on anti-corrssion, especially can be used in seawater. Also the Monel is easy to be fabricated, it can be hot- and cold-working, machining as well as good welding ability. DLX can make the monel 400 wire from dia 0.05mm

Brand Name:AUTOFOR

Model Number:WWQ150

Place of Origin:China

.... AUTOFOR has developed various metal/alloy/metallographic/non-metallic cutting cut-off Wheel for more than 30,000 customers worldwide, which are widely used in non-ferrous metals and ...

Brand Name:YUHONG

Model Number:ASTM B111 C71520

Place of Origin:CHINA

...er elements, whereby the zinc content may not be more than 1%. When other elements are present, nickel has the largest individual content after copper, compared with each other element. As with other copper alloys, it is necessary to distinguish between

Brand Name:XCE

Model Number:XCEM

Place of Origin:China

...Copper Base PCB Circuit Boards Fabrication Parameter: PCB parameter Max panel size 508*610mm Board thickness tolerance　　 T≥0.8mm±8%,T＜0.8mm±5% Wall hole copper thickness　　 ＞0.025mm(1mil) Finished hole 0.2mm-6.3mm Min line width 4mil/4mil(0.1/0.1mm) Min bonding pad space 0.1mm(4mil) PTH aperture tolerance ±0.075mm(3mil) NPTH aperture tolerance ±0.05mm(2mil) Hole site deviation ±0.05mm...

Brand Name:Yuhong

Model Number:ASTM B111 C71500

Place of Origin:China

...Design:​​ ​​Base Alloy​​: C71500 (CuNi30Mn1Fe), a ​​70/30 copper-nickel alloy​​ with superior corrosion resistance and thermal conductivity. ​​Dimensions​​: Outer diameter 10–159mm, wall thickness 1–20mm (customizable). ​

Brand Name:JX

Model Number:WCu Copper Tungsten Alloy Tungsten Electrodes Alloy Round Rod

Place of Origin:China

...Copper Tungsten Alloy Tungsten Electrodes Alloy Round Rod WCu Copper Tungsten Alloy Tungsten Electrodes Alloy Round Rod is a two-phase pseudo alloy with tungsten element as the base and copper element as the secondary. It is a composite material in metal. Due to the great differences in physical properties between copper and tungsten, it can not be produced by melting and casting method. Now it is generally produced by powder alloy...

Brand Name:Inconel 625 Powder

Model Number:Inconel 625 Powder

Place of Origin:China

...Base Alloy Powder is a high-quality metal powder that is composed of a variety of elements to achieve specific properties and characteristics. This powder is primarily composed of Nickel (Ni), along with Chromium (Cr), Molybdenum (Mo), Iron (Fe), Cobalt (Co), Tungsten (W), Titanium (Ti), Aluminum (Al), Silicon (Si), Carbon (C), Manganese (Mn), Phosphorus (P), Sulfur (S), Boron (B), and Copper...

Brand Name:Victory

Model Number:6J11

Place of Origin:China

Copper Based Manganin Alloy Strip / Wire 6J11 Manganin is an alloy of copper, manganese, and nickel. It was created by Edward Weston in 1892 as an improvement to his previous alloy, Constantan. Manganin has moderate resistivity and a low temperature ...

Place of Origin:Jiangsu, China

Brand Name:jinyi

Model Number:Cu Sn alloy

Customized Cu Sn Copper Tin Alloy Product Description Welding temperature 798℃-850℃. Depending on the welding temperature, the ratio of tin to copper is also different. Physical: Tin (Sn99.95) : melting point 232℃, density 7.29g/cm3. Copper: melting point ...