Sign In | Join Free | My insurersguide.com
insurersguide.com
Products
Search by Category
Home > Engine Parts >

220 - 240V Electrical Appliance Tester High Current Arc Ignition Tester HAI-1

Categories Electrical Appliance Tester
Brand Name: HongCe
Model Number: HAI-1
Certification: Calibration Certificate(cost additional)
Place of Origin: China
MOQ: 1 set
Payment Terms: L/C, T/T
Delivery Time: 30 days
Packaging Details: Plywood
Price: Negotiatable
Arc strike current: 33A
Arc strike voltage: 220-240V
Electrode running speed: 254mm/s±25mm/s
Arc strike frequency: 40times/min
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    220 - 240V Electrical Appliance Tester High Current Arc Ignition Tester HAI-1

    High Current Arc Ignition Tester

    HAI-1


    Products Introduction


    This device conforms to standard requirements of UL 746A, UL746C, UL 498 clause 114, IEC 60950-1, BS EN 60950-1, BS 7002, etc. It is suitable for arcing resistance test of the materials of electric and electronic products, household appliances and etc. The working principle is to simulate the electric leakage on the insulator which may be caused among different polar of live parts or between live parts and grounded (earthed) metal parts. It is used to measure and assess the arc resistance performance of insulator under the prescribed voltage.

    High current arc ignition tester adopts dual electrodes. With specific current (33A) and power factor (COSφ0.5), according to a certain arc strike speed (254mm/s) and repetition frequency (40 times/min), repeatedly arc strike to 200 times on the surface of specimen. The large current arc ignition performance (HAI) can be assessed according to whether the sample can be ignited.


    Technical parameters


    Electrodes

    Ф3.5mm 30° Copper(Static) electrode

    Ф3.0mm 60° Stainless Steel(Dynamic) electrode

    Arc strike current33A
    Arc strike voltage220-240V
    Electrode running speed254mm/s±25mm/s
    Arc strike frequency40times/min
    Power factorCOSφ0.5
    Test times0-9999times
    Working voltage220VAC /60Hz, 15kVA

    Operating Steps:


    1.Functions of Panel

    POWER: Turn on the power switch and the device is powered on.


    2.STOP/START: To stop or start testing or debugging.

    RESET: Clear the current displaying value of test times.

    COMPLETION: The sound and light alarms will be given out after testing completion.

    AUTOMATIC: Run the testing automatically

    MANUAL: When choose the manual mode, the motor can start working even operator doesn’t press the start button, it is convenient for debugging.

    TEST: Choose this mode, the device will process testing normally after debugging.

    DEBUGGING: Under [AUTOMATIC] mode, press [START] button, slowly rotate the knobs to adjust the current and voltage, until the working current reaches 33A (220V-240V), and the power factor is fine tuned to 0.50.


    3. The installation of the test sample


    4.As shown below, when the power is turned off, fix the 130 mm x 13 mm x (2 ~12) mm sample to the jig, adjust the position of the electrode so that the two electrodes are at an angle of 45 ° and in good contact. The height of the specimen can be adjusted by adjusting the three plum bolts.


    When install the electrodes, must fix the screws tighten on the electrodes fixtures, or the electrodes will fall off.



    Quality 220 - 240V Electrical Appliance Tester High Current Arc Ignition Tester HAI-1 wholesale
    Send your message to this supplier
     
    *From:
    *To: Guangzhou HongCe Equipment Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0