AEROPAK Zinc spray paint offer quick-drying corrosion protection with a long term effect for
AEROPAK Zinc spray provides all metal surfaces, such as hot-dip
galvanized parts being repaired, with permanent, cathodic corrosion
protection. It forms a quick-drying, adhesive, protective layer of
microfine zinc flakes.
In a salt spraying test according to DIN53167 or DIN50021, metal
parts sprayed with AEROPAK Zinc spray showed no corrosion, even
after more than 300 hours. The innovative zinc flakes form a highly
resistant protective layer, even against extreme weather and
The color of AEROPAK Zinc spray “bright grade” has been adapted to
that of hot-dip galvanization.
-99.9% Zinc Purity
-No primer need before spraying
-300hrs Salt spraying test per DIN53167 or DIN50021
-As high-quality rust protection primer
- For touching up welded or drilled sections
-As a conductive intermediate layer in spot welding
-Wherever metal must be protected from corrosion
In addition to the above-mentioned applications, AEROPAK Zinc spray
“bright grade” is preferred for the repair of damaged zinc coatings
in the same colour.
For best results, clean surface of grease, wax, rust and dust.
Scuff or lightly sand all glossy surfaces removing any unwanted
bumps or flaking paint, then dust off. Prime raw timber or metal
with Aeropak primer and allow to fully dry.
IMPORTANT : Shake the can vigorously for one minute before use.
Holding the can 30cm from prepared surface, begin by applying one
light mist coat, spraying in a continuous motion across the surface
working left to right. Pause, allowing the mist coat to set for 30
to 60 seconds, then apply additional coats working at 90° to the
first coat. If a thicker finish is required, allow at least one
hour between extra coats. When painting over existing paint always
Clean any over spray with mineral turps or general-purpose
thinners. For better long term storage, turn can upside down and
spray until no paint is coming out.
Spray unneeded product on to newspaper dispose to waste.
Empty can is recyclable.
Do not use near fire or naked flame.
Do not puncture or incinerate even if empty.
Keep in a cool place out of direct sunlight.
Do not store above 50°C. / 122 F
Never spray at eyes or face.
Keep out of reach of children
If swallowed seek medical advice immediately.
Warning - intentional misuse by deliberately inhaling contents
can be harmful or even fatal.
Details of Package:
|Can Size:||∮65mm x 158mm H|
|Package:||400ml x 12pcs/ctn|
|Carton Size:||275x205x205 mm|
|20ft Container Loading:||2500 cartons|