Categories | Guardrail Roll Forming Machine |
---|---|
Brand Name: | ZH |
Model Number: | ZH475 |
Certification: | CE/SGS |
Place of Origin: | CHINA |
MOQ: | 1 set |
Price: | USD 45000-60000/set |
Supply Ability: | 10 sets/months |
Delivery Time: | 60 working days |
Packaging Details: | packaged by waterproof film cover |
Feeding width: | 475mm |
Thickness:: | Guardrail forming machine |
Thickness: | 3.5mm |
Main power: | 18.5kw+18.5kw |
Production capacity: | 8m/min |
Warranty: | 2 years |
Aftersale service: | engineer available |
TRANSFER: | gearbox |
Cutting device: | Hydraulic cutting |
stations: | 18 stations |
Steel Highway Guardrail Roll Forming Machine PLC Control With 3 - 4mm Thickness
Main components:
Decoiler -------------------------------------------------- 1 Unit
Feeding guide ------------------------------------------ 1 Unit
Main roll forming machine --------------------------- 1 Unit
Hydraulic cutting device ------------------------------ 1 Unit
Hydraulic Station --------------------------------------- 1 Unit
PLC computer control -------------------------------- 1 Unit
Output table ---------------------------------------------- 1 Unit
Specifications
Length of the main part | About10500*1650*1500mm |
Weight of main part | About 9.5 ton |
Voltage | 380V/50HZ3Phase (as customer`s request) |
Roller fixer | Middle plate welded |
Frame | 400H steel welded |
Middle plate thickness | 30mm |
Drive mode | Chain Drice//Gear Drive |
Material of rollers | GCR15, quenched treated HRC58-62℃ |
Material of shafts | 45# steel |
Diameter of shafts | Φ90mm(depend on defferent design) |
Number of rollers: | 16 rollers |
Main power | 37kw |
Cutting&Hydraulic | Double guide pillar |
Hydraulic motor power | 15kw |
Hydraulic Pressure | 10-12MPa |
Cutting drive | Decelerating motor + Chain drive gear all by high-frequency |
Control System | PLC system: Mitstubishi, Panasonic,Detal,Siemens,Schneider |
Feeding Material width | Better as your drawing or from our designer |
Feeding Thickness | 3~4mm |
Effective width | Better as your drawing or from our designer |
Productivity | 15/min |
The feature and advantage of our guardrail roll forming machine
1 De-coiler
1) The un-coiler with bipyramid and tension power,
2 Loading 8T. Inner diameter of coil: φ 508mm,
3) Maximum diameter of coil: φ 2000mm,
4) Power of tension power: 2.2kw,
2, Flatting machine
1) The wall plate type seven roller flatter, two rollers clamp
deliver, five rollers for leveling.
2) Power: 7.5kw,
3, Punching machine
1) Using type Yl32-315 4 pillar hydraulic pressure puching machine,
2) Hydraulic pressure power: 22kw.
3) Material of blade mould & plunger chip is alloy steel
Cr12MOV.
4, Fast feeding
1 Initiative delivers.
2 The power disposition is the 2.2KW.
3 The reductor is ZQ250.
5, Opto-electrical Cutting device
6, Forming machine:
1) Forming racks: 12sets
2) Cast iron torri type
3) Width of machine: 550mm
4) Material of torri is HT200, tempering
5) Double axis transmission gear box 1set, under the axis
transmission gear box 10set, bevel gear modulus M=9, material of
gear box is only HT200.
6) Power of main machine: 55kw, transducer speed governor. ZQ650,
reductor, speed ratio: 48.57, Between the transmission gear box
uses 1 inch double chain drive; Connects with the rotary drive
shaft between rollers, rotary drive shaft model 140-275; Uses 1.5
inch double chain drives with the speed reducer;
7, Collection table
8, Control system
Production line uses PLC controller, opto-electrical device control
cutting. But manual and automatic control whole production line for
each part coordination.
9, Forming mould:
Material is GCr15. Whole quenching hardness is HRC55 º ~60
Working flow
Decoiler–feeding guide–straighten and leveling–front hydraylic
punching–roll forming machine–Hydraulic cutting–Output table
Machine pictures for reference
Contact Us
Shirly Zhang | |
Company | Cangzhou zhongheng machine manufacture Co.,ltd |
Address | Nancang road botou city hebei province China |
+8615133711731 | |
Youtube | https://www.youtube.com/channel/UCFbWECOfV2xeM-WCaww_iPQ |