Power Distribution Cabinet Nine Bending Distibution Cabinet
The general form of the cabinet is cuboid, with 12 edges to support
the cabinet. Bend the steel nine times on the bending machine. Form
the profile in the diagram. It is called a nine bending section.
The nine curved sections are made of 12 prismatic cabinets, which
are called nine bending cabinets.
Process characteristics and properties:
1) the cabinet body skeleton adopts ten percent off type section,
the circular hole or square hole of each interval 25mm of the
beforehand perforated bar makes the internal installation more
convenient, the special quality three passes welded into the whole,
the structure is firm and reliable, the shape is beautiful.
2) the installation board can be 25mm for the unit distance, move
back and forth, adjust the depth.
3) the top cover, side plate, back plate and base floor are all
fixed by screws, which is easy to assemble and disassemble, and the
installation work inside the cabinet is more convenient and fast.
4) the door hinge is concealed and can be opened to 130 degrees, so
it is easy to install and replace.
5) the three cover plates of the floor entry holes can be replaced
with each other, freely moving to facilitate the import of cables
and opening of holes.
6) the installation plate is made of 2.5mm thickness cold plate,
galvanized or spray painted.
7) the door plate is made of polyurethane foam sealant strips for
cold rolled plates, and the required protection level can be
obtained. The front and rear doors can be made single or double.
8) surface treatment: degreasing, phosphating, pickling, outdoor
waterproof plastic powder.
9) color: RAL7032 or RAL7035 and optional color.
Nine bending is a vivid application of geometry in industrial
manufacture, providing a cheap and practical technical scheme for
the skeleton of load-bearing cabinet. Make great contributions to
the development of industrial automation.
Process performance and features
1) mounting plate distance can move from back and forth to adjust
2) surface preparation:degreasing, phosphating, electrophoresis
primer, outdoor waterproof cover powder.
3) Main color:RAL7032 mounting plate:orange color or
4) According to the customers requirements,we can make different
5) the down hole have cover board ,it is easy to disassemble the
front and back doors
6) The three bottom cover boards can be exchanged each other,free
movement.easy to import cable, open the hole into the line.
7) The base is easy to assemble and disassemble(choose by your
|Product name||Distribution box|
|Package||1 Piece Per Carton|
|Paint Finish||Epoxy Polyester Coating|
|Lock||Available On Request|
|Accessories||Wall Mount Brackets To Be Offered Seperately|