Lacquer Color Aerosol Spray Paint AEROPAK Brand With ISO90001
1.Widely used in advertising industry, surface-treated wood, metal,
ABS plastic, glass and automotive, motorcycle surface decoration
2. Spray Paint has the features of good leveling, high coverage,
fast dry, rich color and high luster, better flexibility, impact
enduring, strong adhesiveness, and match well with many types of
3.It’s fast-drying and water- and scratch-resistant, and will not
fade or yellow. It also protects against rust.
For best results, clean surface of grease, wax, rust and dust.
Scuff or lightly sand all glossy surfaces removing any unwanted
bumps or flaking paint, then dust off. Prime raw timber or metal
with Aeropak primer and allow to fully dry.
IMPORTANT : Shake the can vigorously for one minute before use.
Holding the can 30cm from prepared surface, begin by applying one
light mist coat, spraying in a continuous motion across the surface
working left to right. Pause, allowing the mist coat to set for 30
to 60 seconds, then apply additional coats working at 90° to the
first coat. If a thicker finish is required, allow at least one
hour between extra coats. When painting over existing paint always
Clean any over spray with mineral turps or general-purpose
thinners. For better long term storage, turn can upside down and
spray until no paint is coming out.
Spray unneeded product on to newspaper dispose to waste.
Empty can is recyclable.
Do not use near fire or naked flame.
Do not puncture or incinerate even if empty.
Keep in a cool place out of direct sunlight.
Do not store above 50°C. / 122 F
Never spray at eyes or face.
Keep out of reach of children
If swallowed seek medical advice immediately.
Warning - intentional misuse by deliberately inhaling contents
can be harmful or even fatal.