Acrylic Lacquer Aerosol Spray Paint Strong Adhesiveness High
Coverage, Fast Dry
Aerosol spray paint is made from thermoplastic acrylic resin with
It can provide films with excellent weather resistance.
The product has the features of good leveling, high coverage, fast
dry, rich color and high luster, better flexibility, impact
enduring, strong adhesiveness, and match well with many types of
It can widely used in surface finishing and mending of metal.wood,
glass.leather.ceramics and plastics.
The films should avoid contacting with gasoline or other solvents.
This product is a thermo plastic acrylic aerosol spray paint and it
has the characteristic of easy performance, good
atomization, high spray rate. The paint can dry fast and the film
finish has excellent hardness, adhesion, gloss and flexibility ,
impact resistance, colorful surface and good decorative effect,
wonderful protect ability. It can be widely used for metals, wood
with finished surfaces, glass, ABS and other surfaces.
1.Cleaning the greasy dirt, water stains and dust of the spraying
2.Filling up hollow part with the atom ash and rub down.
3.Shaking the can about 2 minutes before the spraying and make sure
it mix well.
4.Pressing the nozzle with your forefinger and spraying the
surfaces at a distance of 20 to 30cm with a constant speed.
5.You can spray several times, the performance effect is better
than one thick coating if you spray thin coating every two
6.After use, cleaning the nozzle by reversing the can and pressing
the nozzle for three seconds in case of clogging before you
1.Trial spraying on small area of unknown materials and it is
workable if there are not adverse reaction after 10 minutes.
2.You must assure the can is straight while spraying and the angle
is not less than 45 degrees from the horizon.
3.Please do not use in rainy or cold environment.
4.Please work in well ventilation condition and it is good for the
spraying effect in cool and dry, dustfree environment.
5.Keep the can away from the children.
6.Please store it in cool place which the temperature is
between0-40°C and keep it away from fire and heat sources. It is
to expose the spray paints in sunshine or burning.
7.After use, reversing the empty can and pressing the nozzle to
release the remaining gas, then put the empty can in safe place.
1.In case of skin contact, please wash with soap repeatedly and see
the doctor according to he situation.
2.In case of eyes contact, please wash your eyes with water and get
3.When using, if you feel it is hard to breath or choke sensation
in chest, please deep breathinh in well ventilation place and get
assistance from doctors as soon as possible if still feel